WEEK 7
AGRICULTURAL SCIENCE
SS 1
TOPIC: FARM SURVEYING AND PLANNING OF FARMSTEAD
Farm surveying is the process
of measuring and mapping out the position, size and boundaries of an area of farmland.
Importance of Farm Surveying
It helps to determine the size of the farmland.
It helps to determine the slope or gradient of the farmland.
It helps the farmer to make decisions on the locations of various
farm buildings and structures on the farm.
It helps to determine the amount of farm inputs that will be needed
on the farm e.g. the amount of labour, seeds, fertilizers etc.
It helps the farmer to maximize resources available to him and
to avoid wastage.
Farm survey plan can enable the farmer to access bank loan.
It helps to determine the yield of crops on the farm.
It ensures the security of the farmland.
Farm survey plan is a basis for feasibility studies.
Conclusion
At the end of this lesson, students
were able to:
Define farm surveying.
State the importance of farm surveying.
State the description and uses of common surveying equipment.
Assignment
What
is farm surveying?
Outline
the importance of farm surveying.
List
and discuss four survey equipment commonly used in the farm
Period 3: Content
Common Surveying Equipment and their Functions
Ranging pole
Gunter’s chain
Measuring tape
Prismatic compass
Theodolite
Arrows/pin
Offset staff
Beacon or Pillars
Ranging Pole
Description:
It is made of metal or wood.
It has a pointed end for ease of stabbing
it into the ground.
It is usually painted white and black/red
to enable it to be seen from afar.
It is of varying length: 1.8m, 2.4m or
3.0m.
It is usually of a circular cross-section.
Functions:
It is used for marking stations.
It is also used for making straight lines.
Gunter’s Chain
Description:
It consists of a series of dumb bell-shaped
links of steel wires joined together by three small rings.
The length of the Gunter’s chain is 66ft
(100 links) or approximately 20m.
A link is the distance from the middle
of the central ring to the middle of the next central ring.
It is entirely metallic with brass handles
at both ends.
Function:
It is used to make a short and
detailed measurement of length and breadth.
Measuring Tape
Description:
It is usually made of linen or fine steel
sheet.
It is usually marked on one side with
metric units and on the other side with imperial units.
Function:
It is used for taking measurement
of length, breadth and height.
Prismatic Compass
Description:
It has a prism.
It has a compass card marked in degrees,
half degrees and minutes and seconds, in a clockwise direction.
It is normally placed on a stand.
Functions:
It is used to measure bearings.
It is also used to measure angular distance.
Theodolite
Description:
It has a spirit level which is used to
define horizontal plain against which angles of elevation or depression are measured.
It has a lower plate which contains the
graduated horizontal circle made of glass or brass.
It consists of a tripod stand which forms
the base of the instrument.
Function:
It is used to measure horizontal
or vertical angles .
Arrows or Pins
Description:
It is a thin pointed steel about 30cm
long with one end curved into a ring.
A red cloth is usually attached to the
ring so that it can be easily seen from afar.
Functions:
It is used to mark off chain lengths as
measured.
It is used for marking stations.
Offset Staff
Description:
It is a graduated rod, 3m long.
Each telecopic link is 30cm in length.
Function:
It is used for taking short offset
measurements i.e. make up measurements.
Beacon or Pillar
Description:
It is a rectangular concrete block partially
buried in the ground.
Dates and other symbols are usually inscribed
on top of the block.
Functions:
It is used for marking off stations as
measured.
It is also used for the recognition of
a surveyed area.
Precautions that Should B Taken When Chaining/Measuring
A Farmland
Pull chains, tapes or ropes taut.
Equipment such as Theodolite should be placed on a perfectly horizontal
surface.
Avoid error due to parallax.
Properly align chain or tape before taking measurement.
Make sure the equipment is in good condition before use.
Avoid errors of transposing figures on paper.
General Maintenance of Surveying Equipment
Clean instrument after use.
Keep instruments in cool, dry place.
Metal parts of instruments should be oiled or painted before long
storage.
Keep instruments away from moisture to prevent rusting.
Replace worn-out parts.
Tighten nuts and bolts periodically.
WEEK 8
AGRICULTURAL SCIENCE
SS 1
TOPIC: FARMSTEAD PLANNING
Contact 1 and 2
A farmstead consist of the farm, the farm house and all its production
and processing structures.
Meaning of farmstead
Planning
It involves making a layout of the farmstead. The layout of farm
structures and buildings is the way the structures and buildings on the farm are
arranged.
Factors To Consider
When Siting A Farm/Farmstead
Topography: Topography is the
surface shape of the land.
Soil type:Type of soil may determine
the type of farming enterprise to embark on.
Accessibility: The farm should
be easily accessible for easy evacuation of farm produce to market.
Water supply: The farm should
be located close to a water source.
Nearness to market: This reduces
the transportation cost.
Drainage: Crop farms should be
located on well drained soils. Gentle slope facilitates proper drainage.
Health and hygiene: Locate livestock
units against wind direction and far away from staff living quarters.
Principles of Farmstead
Layout
Plant the crops on the best soil within
the farm.
Livestock buildings should be located
on the poorest soil within the farm.
Buildings should be located on easily
accessible areas.
Residential and office buildings should
be located far away from livestock buildings.
Farm buildings should not be located
on slopes to avoid erosion.
Importance of Farm
Planning
It enables the farmer to make proper
use of the land.
It makes coordination and control of
farm operations easier.
It ensures that livestock buildings
are properly located in relation to other farm buildings.
It ensures proper siting of farm structures.
It promotes neatness and prevents pollution
within the farmstead.
Conclusion
At the end of this lesson, students were able to:
Define farmstead.
State factors to consider when siting a farmstead.
State the importance of farmstead planning.
Calculate area of farmland and plant population.
Assignment
A farmer surveyed his triangular farmland
with a base length of 2km and a perpendicular length of 1200m. Calculate the area
of the farm.
State four necessary precautions that should
be taken in order to eliminate errors when chaining a farmland.
List four factors required in choosing a
site for a new school garden.
Contact 3: Content
Calculation of Plant
Population
Area of farmland is
determined by considering the shape of the farmland and using the appropriate formular
for area.
|
Shape of Farmland |
Formular for Area |
|
Square |
L2 |
|
Rectangle |
L x B |
|
Traingle |
½ bh |
|
Circle |
∏r2 |
|
Trapezium |
½ (a + b)h |
Note: Agricultural land is usually measured in hectares (ha).
One hectare = 10,000m2.
Spacing is determined
by multiplying the distance between one crop and the next along the row with the
distance within one row and the next.
Example
If the length and width of a farmland are 60m x 30m respectively,
and the spacing of a tomato crop plant is 30cm x 30cm, calculate:
The area of the farmland.
The plant population.
The total population if there are two plants per stand.
Solution
Area of farmland = 60m x 30m = 1800m2 or 0.18ha.
Spacing = 30cm x 30cm
= 0.3m x 0.3m
= 0.09m2
= 20,000 plants.
Plant population at two plants per stand = 2 x 20000 = 40,000 plants.
WEEK 9
AGRICULTURAL SCIENCE
SS 1
TOPIC: SOURCES OF FARM
POWER
Contact 1 and 2
Farm power is a source of power used in doing farm work. Power
refers to energy or force that can be used to do work.
Farm power can be obtained from the following sources:
Human power
Animal power
Mechanical power
Electrical power
Water power
Wind power
Solar power
Biogas
Human Power
This is the use of human power to do farm work.
Farm Operations Which Human Power Can Be Use for:
Land clearing
Stumping
Ridging
Planting
Weeding
Harvesting
Storage
Advantages of Human Power
Man uses his intelligence to control
the work he does.
It is easily available in all farm
operations.
It has control over all other sources
of farm power.
It can be used for jobs that require
precision.
Disadvantages of Human Power
The output is low (75W).
It can easily get fatigued.
Efficiency decreases with age.
It may be expensive.
Humans can get sick and die.
Animal Power
This is power derived from animals used for farm work. They are
called draught animals e.g. oxen, bullock, donkey, horse.
Operations Which Require Animal Power
For drawing plough, harrow, ridger and planter.
For carrying people.
For transporting farm produce.
For transporting farm inputs such as fertilizers, seeds, herbicides
etc.
Advantages of Animal Power
Its output is higher than that of man. The output of a bull is
about 500W.
It is cheap to purchase compared to machines.
It is easy to operate.
It has low maintenance cost compared to machines.
It can operate in rugged terrains.
It does not get fatigued easily compared with man.
Disadvantages of Animal Power
Power output is low compared with machines.
Animals can get sick and die.
Animal can get fatigued.
It is not suitable for very large scale production.
It is not suitable for processing agricultural products as they
may eat up the products.
It is restricted to certain climatic zones e.g. tsetse fly free
zones.
Qualities of a Good Draught Animal
It must be docile.
It must be strong and have strong hind legs.
It must have strong hooves.
It must be healthy.
It must good body size and deep barrel.
Precautions to Be Observed When Using Draught Animals
Apply muzzle.
Treat animals fairly: feed them properly and do not overwork
them.
The best time to use work animals is early in the morning or
in the evening.
Mechanical Power
This is the use of machines to carry out farm operations. Such
machines include: Tractor, planters, harvesters, ploughs, harrows, ridgers etc.
Farm Operations Which Require Mechanical Power
(i) Ploughing (ii) Planting
(iii) Stumping (iv) Harrowing
(v) Ridging (vi) Harvesting
(vii) Weeding (viii) Grinding
(ix) Feed milling (x)
Transportation of inputs and
outputs.
Advantages of Mechanical Power
It works faster and more efficiently.
It reduces overall cost of production.
It makes farm operations timely.
It reduces farm drudgery i.e. it makes farm work less tedious.
It is not prone to disease.
It can cultivate a large area of land per unit time.
Disadvantages of Mechanical Power
It is expensive to purchase and to maintain.
It can destroy the soil structure by causing soil compaction.
It causes air pollution.
It can lead to displacement of labour.
It requires technical know-how which may not be available.
Electrical Power
This is the use of electrical power to carry out farm operations.
Farm Operations Which Require Electrical Power
(i) Incubation (ii) Milking
(iii) Refrigeration/Freezing (iv)
Candling
(v) Plucking (vi) Milling/grinding
(vii) Brooding of chicks (viii)
Drying of products
Advantages of Electrical Power
It is a neat source of farm power.
It is a cheap source of farm power.
It is very versatile.
It saves labour and is very efficient.
It aids fast operation.
Disadvantages of Electrical Power
Its supply is not regular in Nigeria.
Initial outlay is expensive.
It is dangerous if carelessly handled and can cause electrocution
and fire harzards.
It cannot be widely used in field operations.
Conclusion
At the end of this lesson, students
were able to:
Define farm power.
Enumerate the sources of farm power.
State the advantages and disadvantages of each source
of farm power.
State the qualities of a good work animal.
Precautions to take when using draught animals.
Assignment
List four
factors that may affect the efficiency of draught animals.
State three
advantages and three disadvantages of solar energy as a source of farm power.
State one
advantage and one disadvantage of the following sources of farm power: (i) wind
(ii) internal combustion engine (iii) electricity.
Give two
merits of the use of draught animals in farm operations.
Contact 3:
Solar Power
This is energy gotten from the sun and used to carry out farm
operations. Solar energy is converted into electrical energy by solar panels.
Farm Operations that Require Solar Power
(i) Generation of electricity.
(ii) Heating of farmstead.
(iii) Processing of farm produce.
(iv) Solar energy is used by crops for photosynthesis.
Advantages of Solar Power
It is a cheap source of farm power.
It is a neat source of farm power.
It is readily available during the day.
It can be harnessed and stored and used at any time.
Disadvantages of Solar Power
It is only available during the day.
Its supply cannot be controlled.
It is expensive to harness and store.
It fluctuates in supply.
Wind Power
This is the use of energy from the wind to carry out farm operations.
Wind is air moving at a very high speed.
Farm Operations Which Require Wind Power
(i) For the operation of wind mills to generate electricity.
(ii) It is used in winnowing i.e. separation of chaff from grains.
(iii) It is used for drying grains.
(iv) It may be used in pumping water out of a borehole.
Advantages of Wind Power
It is cheap.
It is a neat source of power.
It is an alternative to electrical power.
It is available every where.
Disadvantages of Wind Power
Its supply is sporadic.
It cannot be stored and is difficult to control.
It is limited to certain farm operations.
Water Power
Water power is derived from the movement of flowing water in
streams, rivers, lakes and dams.
Operations Which Require Water Power
(i) Generation of electricity.
(ii) Transportation of farm produce e.g. logs of timber etc.
(iii) To operate steam engines.
(iv) For processing farm produce
(v) It is used by crops for growth.
Advantages of Water Power
It is cheap.
It is easy to harness.
It can be easily converted to other forms of energy.
Disadvantages of Water Power
It is not available in all areas.
Its supply is affected by weather.
It could be destructive if carelessly handled.
It does not supply power directly.
Biogas
Biogas is a biofuel that is naturally produced from the decomposition
of organic waste such as animal dung.
Advantages of Biogas
It is a cheap source of power.
It can be easily controlled.
It can be used for heating, cooking, drying and to generate electricity.
It converts waste (dung) to asset (fuel).
Disadvantages of Biogas
It requires expertise which may not be readily available.
It is only available where farm animals are reared on a large
scale.
It may be expensive to set up and maintain.
It is not a common source of power.






Comments
Post a Comment
Write your comment here